The Bissell ProHeat 2X Lift Off Pet 15651 Carpet Cleaner is powerful enough to out-clean the leading rentals. With the dual dirt lifter that reaches deep down into the carpet fibers. The Bissell ProHeat is lightweight and agile. It also dries in about an hour and the carpet cleaner includes Bissell’s antibacterial formula. You will see the dirt when you are emptying the tank and you will think “My carpets couldn’t be that dirty”.
This carpet cleaner from Bissell is available online, have a look on Amazon to see more reviews. We will continue this review by describing the features of this air purifier in detail. Some parts might overlap one another. However, we recommend to use the table of contents in the top right corner of this post to navigate through the review.
Bissell 15651 ProHeat 2X Lift Off Pet Carpet Cleaner Video
2 Devices in One
Because pets and their messes go everywhere, the ProHeat 2X Lift-Off Pet is manufactured to deep clean anywhere your pet goes. The upright feature cleans carpets in any room in the house, while the detachable spot cleaner can be taken anywhere.
Use the Bissell Professional formula to permanently get rid of tough spots and odors. This formula offers ScotchGard Protection to avoid future spots.
This deep cleaner is specifically manufactured for use with the Bissell EasyFill System formula. Look for the EasyFill System logo on the Bissell Deep Clean plus Antibacterial Formula.
With HeatWave Technology, constant heat helps maintain water temperature throughout the cleaning process, while two rows of PowerBrushes loosen and get rid of deep-down dirt from carpets.
How to Use the Bissell 15651 ProHeat 2X Lift Off Pet Carpet Cleaner
Bissell 15651 ProHeat 2X Lift Off Pet Carpet Cleaner is as powerful as it sounds. But first it needs to be put together. In this section we got you covered. For assembly all you will need is a screwdriver. Start by sliding the handle onto the base of the machine. There are 4 screws taped to the handle and there are 4 holes located on the back of the machine.
Insert each screw in an upward angle and use the screwdriver to secure. Wrap the cord onto the side of the unit until it is secured. Now secure the attachments to the hose on the back of the cleaner. Now that your Bissell ProHeat 2x is ready you are one step closer to the deep clean you deserve.
Your Bissell 15651 ProHeat 2X Lift Off Pet Carpet Cleaner has a light, indicating when the heat wave technology is activated. This is called the heat indicator light. If the light is not activated, then there are a couple of solutions for you.
Check to see if your power is switched on. The power must be on to activate the heat indicator. Another solution may be that your portable spot cleaner is not attached properly. Attach the spot cleaner by pushing down firmly to check to see if it is properly in place. These solutions will fix your ProHeat 2X Lift-Off indicator light.
How to Replace the Belt and Brush Rolls?
If your Bissell 15651 ProHeat 2X Lift Off Pet Carpet Cleaner brushes aren’t spinning, it could be time to replace your belts or brush rolls. All you need is a screwdriver. Remove the spot cleaning pas from the base. Now remove the 3 screws that hold the 4 nozzles in place.
Then remove the nozzles. Now find the side with the pad release pedal. Place your Lift-Off on its side with the pad really pedal on the bottom. Using your screwdriver, you have to remove the 3 screws from the end cap. Then remove the end cap. You will then remove the single screw holding the pivot arm. Then release the pivot arm by gently pulling it off.
If the small belt is broken, you need a replacement. If not, remove it at this point. If the brush roll does not turn you have to pull out both brush rolls making sure the washers are still on. Also look for a broken belt at the bottom of the metal axles. If it is broken you will need a replacement.
Now slide the new brush belt down both axles past the belt guard. Slide one brush down until the axle comes through the top. Fit the belt around the end of the brush roll. Hold the bottom brush belt with one finger. Slide the other brush roll down the axle. Remove your finger and turn the brush roll until both begin to turn.
There are washers on both ends of the brush rolls. Make sure they stay in place. Now return the small belt to the brush rolls. Return the pivot arm with one screw and the caps with 2 screws. Set the machine as an upright vacuum and hook the nozzle into the black end caps. Secure the end caps with 3 screws. Now that your belt and brush rolls are replaced you are ready to clean.
Related Bissell Carpet Cleaner Articles
Best Bissell Carpet Cleaners
How to Use the EasyFill?
In this section we get familiar with the EasyFill for your Bissell 15651 ProHeat 2X Lift Off Pet Carpet Cleaner. If you have chosen the 2X concentrated formula you have to skip to the second half of this section. Locate the formula and water tank in the back of your machine. Lift the tank from your cleaner by pulling up on the handle. Place your tank on a flat surface and remove the cap. Fill your tank with hot water to the fill line located on the tank.
Then twist the tank’s yellow cap back into place. Next, you will add the EasyFill formula by squeezing it through the color coded cap. Place the tank back up to the machine. Your ProHeat 2X Lift-Off is now ready.
If you have chosen 2X concentrated formula you want to follow these instructions. Lift the tank from the cleaner by pulling up on the handle. Place your tank on a flat surface and remove the cap. Fill your tank with hot water to the fill line located on the tank. Next, fill your tank with 1,5 ounces of the 2X concentrated formula of your choice. Twist the cap back on the tank and place the tank bag onto the machine. Your Bissell ProHeat 2X Lift-Off is now ready.
Loss of Suction
In this section we will come up with solutions to fix the loss of suction in your Bissell ProHeat 2X Lift-Off. One or both of your tanks may not be sealed properly. Pick each one out and make sure it fit snugly into your cleaner.
While your deep cleaner is unplugged, make sure the lip of the nozzle is securely hooked into the groove on the top of the nozzle itself. The patch should not be slanted. Attach the spot cleaner by pushing down firmly to check if it is properly in place. As a sign of good cleaning, your dirty water tank maybe completely full and not able to take anymore. Empty your dirty tank to the sink and then replace it.
If your Bissell ProHeat 2X Lift-Off brush roll stops spinning, then here are a few steps to trouble shoot and correct. Make sure that the pot is not sitting on a slant, push down firmly to put it into place. The brushes will only rotate when the machine is reclined.
Turn the cleaner on and press the recline pedal with your foot. Pull back to recline the machine and the brush rolls will spin. If the brush rolls are still not spinning, you may have tripped the circuit breaker om the cleaner. Turn your machine off and unplug it from the wall.
Then check the brush roll to see if there may have been an object caught inside. Remove any obstructions and plug your machine back in. The belt may not be functioning or is broken and you have to replace it. Hopefully these tips have helped you and your brush rolls are now spinning properly again.
Your Bissell 15651 ProHeat 2X Lift Off Pet Carpet Cleaner is equipped with a spray function for deep cleaning. If the spray is not working, then there are a few solutions that will help you get back on track. Check to see if your formula and water tank maybe empty. if so, all you have to do is re-fill the tank. Another solution maybe that your portable spot cleaner is not attached properly. The pot should not be slanted.
Attach the spot cleaner by pushing down firmly to check if is properly in place. Your pump may have lost prime while the cleaner was in spot cleaning mode. Hold the end of your hose below the water level in your tank to PRIME. Now that these steps have been taken you will see that water and the formula are spraying from your Bissell ProHeat 2X Lift-Off.
Maintenance – Cleaning your Bissell 15651 ProHeat 2X Lift Off Pet Carpet Cleaner
The following simple steps will ensure a long life for your Bissell 15651 ProHeat 2X Lift Off Pet Carpet Cleaner. Flush the system by setting the custom clean knob to the “Rinse” Setting. Now turn on the machine. While holding down the trigger and make one forward and reverse wet pass. Release the trigger and make another forward and reverse pass.
Reset the dial to “tools”. Then clean the hose by suctioning it clean from a container. Before replacing the hose, lift and stretch it to make sure no liquid remains. Any attachments that need cleaning can be removed and rinsed, then dried and replaced in the tool caddy. Your system is now clean and flushed.
Rinse your water tank with hot water and be sure to clean all around the pouch. Lean the top half of the tank through the nozzle area. Pop out the red filter and rinse that as well. Replace it before putting the tank back together. Before putting the tank back on, remove the floor nozzle and rinse it out at the faucet. Pull off and throw away any loose hair or debris that is attached to the brush rolls.
The inside of the end caps can be wiped clean, or can be removed and rinsed clean. Replace the nozzle on the machine by hooking the tabs into the holes on the bottom. Then secure it with a screw. Your machine is now ready to store until your next use. For additional maintenance and care questions please consult your user guide.
Emptying Dirty Water
You need to empty the dirty water tank after use of the Bissell ProHeat 2X Lift-Off. In this section we will explain how you do it. Raise the handle up and lift the dirty water tank from the pot. The tank lid needs to be removed in order to empty and rinse it. Rotate the handle all the way to the other side of the tank. Remove the lid to dump out the dirty water. Watch the amount of mess your Bissell ProHeat 2X Lift-Off picked up and what go es down the drain.
Rinse your tank for good measure. If you are all done cleaning and about to put your machine away. Think about also cleaning the red filter on the pot using a tower. Replace the lid to your newly clean tank and put it back onto the pot. Your Bissell ProHeat 2X Lift Off Pet 15651 Carpet Cleaner is ready to continue cleaning or store for future use.
If you have any questions or comments, please add them below in the comment section. Similarly, please let us know if you spot any mistakes or omissions. Thanks!